Email
MSN
Want
QQ
中文
ENGLISH
Products产品中心
ALL
Laser cutting machines
- Custom size
- MINI laser cutting machine
- Motorized worktable laser cutter
- Auto feeding laser cutter
- Each shift
- Interactive camera
- Camera
- Double heads
- Four heads
Laser engraving machines
Laser marking machines
Suny-1810T double head laser cutting machine
2016-03-26
- Introduction
- Configure
- Characteristic
- Parameter
- Material
- Industry
- Dongguan SunyLaser Technology Co., Ltd. after a period of research and development, Suny-1810T type laser engraving cutting machine was finally published, successfully put into market, in put into the market for a few months, customer response is very good, there are a number of customers Lu Xujia machine. Suny-1810T laser engraving and cutting machine is a economic and applicable machine, she broke the defects of traditional laser equipment expensive, without changing the configuration of the machine on the basis, fully meet the requirements of customers, fully equipped with imported rails, the import motor, imported lenses, in domestic large format laser cutting machine on the market has a very strong advantage and good reputation.
- South Korea imports six balanced linear guide rail
United States ray stepper motor
United States ray drive
Singapore optical system
Japan imported transmission belt
Embedded Samsung 128M memory
2.0U disk interface
New generation master card
Devin LCD
80/100/120/130/150/170W Chinese Academy of science and the development of laser tube
High performance laser power supply
Xu Yang new software development system
Taiwan switching power supply
Guangzhou wind system
Zhongshan air compressor
- 1 imported square linear guide, life can reach more than 20 years
2. Optical lens using high strength Gold silicon and aspheric focusing lens such that the lens resistant paint, high temperature resistant, does not need to be replaced frequently, greatly reducing the use cost, non spherical lens focusing small diameter, better cutting effect < br / > 3 towline imported from Germany
4 all the optical frame has a simple structure, convenient adjustment, easy maintenance of
lens 5 using DSP motion control system, running smooth, fast computing speed. Modular unified design, installation, anti-interference ability, easy to repair and replacement parts
6 emergency stop switch. You can quickly turn off the power supply
7 filter to improve the anti-interference performance of the machine
8 DC switching power supply
9 universal wheel base rubber is used to facilitate the adjustment and stability of the machine
10 install the U.S. import chip driver
11 unique "side blowing" system to effectively protect the laser head, so that the maintenance of the laser head is more convenient
12 mechanical structure optimization design, the overall shape of the smallest size, not only to save your valuable space, but also the structure of the deformation of high precision engraving
13 direction before and after the whole material can be Banfang, without cutting
14 through CE, FDA certification
Graphic format: BMP, PLT, DXF, DST, AI
High speed cutting function:
Red light positioning function: you can choose
Offline output function:
Layered output function:
Air cooling functions:
Before and after the material function:
Foot switch function: optional
: optional telephoto lens Open cover protection:
Emergency stop switch:
Blade working platform: optional
Ultra quiet fan: optional
Enclosed cold water machine: optional
brand SunyLaser model 1810T control mode numerical control Object of action All kinds of fabrics and other non-metallic materials electric current communication purpose Cutting product name Laser engraving machine, cutting machine, engraving machine, laser machine Maximum line cutting speed 800(mm/s) Applicable material All kinds of fabrics, non-woven fabrics, leather materials, etc. The maximum depth of groove 40(mm) positioning accuracy ±0.01(mm) Rapid feed rate 1500(mm/min) model SUNY-1080 SUNY-1080T laser power 80W 80W Number of laser head 1 2 Working area 1800*100mm 1800*100mm Engraving speed 0-1500mm/s 0-1500mm/s Cutting speed 0-800mm/s 0-800mm/s control mode CNC computer control CNC computer control working voltage 220V50Hz 220v50Hz Cooling mode water-cooling water-cooling resolving power 0.025mm 0.025mm positioning accuracy ±0.05mm ±0.05mm Repeat accuracy ±0.08mm ±0.08mm Number of hanged line 70 line 70 line Power equipment 1200W 1250W Weight 280KG 290KG Outline dimension 1900*1100*1300mm 1900*1100*1300mm Minimum molding Chinese character 2mm 2mm
Suitable for wood, paper, leather, cloth, organic glass, epoxy resin, acrylic, wool, plastic, rubber, ceramic, crystal, jade, bamboo products, such as non metal materials.
- The models are widely used in leather, cloth material cutting, engraving of the organic acrylic sheet, electronic industry adhesive tape, double-sided adhesive tape, pet, PC material cutting and carving, handicraft industry of bamboo products, engraving and cutting, printing rubber plate engraving can also be cut in the engraving of glass ceramic paper and other non-metallic materials.
